Do you want to paint your drawing, but there are certain areas you don’t want to paint over? We can help. Masking fluid is a powerful way to protect your drawing.
This is why you need to learn how to use watercolor masking fluid. Masking fluid is easy to use.
This guide will show you how to apply masking fluid in a few simple steps.
In no time, you’ll be a professional and not a beginner. Make sure you read the entire article!
Steps to apply masking fluid
This is an important skill to learn if you want to improve your art and have many tricks under your bell.
Sometimes you might not want to apply paint over a particular area, but if you don’t use masking fluid, you might find yourself in a rather tricky situation. Here are the steps to apply masking liquid to make your life easier.
1. Select the Drawing
First, choose a drawing that you wish to paint over. You can then visualize the final result.
Pick the areas that you want to paint, and those you don’t want to watch.
This step is quite crucial as you won’t be able to add masking fluid later on. Take your time and make sure you choose carefully.
2. Choose the Brush
It is the easiest way for a brush to be damaged by using masking fluid. Masking fluid gets gunky quickly. This is why many artists have mixed feelings about masking fluid.
However, you can stop this by using a silicone brush. This is because silicone doesn’t stick to masking fluid. It’s also a lot easier to apply masking fluid with it.
Once the masking fluid has dried, you can simply peel it off your brush. Alternatively, you could use an old brush you don’t mind losing.
3. Don’t Shake the Bottle
Before you move onto the next step, remember to not shake the bottle.
If you do so, you’re going to get bubbles all over the bottle, and it’s quite hard to deal with that. Make sure your masking liquid is not gummy!
You can stir the masking fluid with a small amount of color if it has. For the most part, don’t shake the bottle.
4. You can also wet the brush
You can skip this step if you decide to use a silicone toothbrush. On On the other hand, you can use an old brush to clean it and keep it clean.
You will need to simply soak the brush in water and then apply soap. The idea is that the soap and water will protect your bristles from the masking liquid.
When you’re done applying the masking fluid to your brush, you should be able easily to peel it off.
5. Use the Masking Fluid
Here’s how you use masking oil: Dip the tip end of your brush in the masking solution. After that, carefully pull the masking fluid out. You can then apply the masking liquid to the desired area.
To keep the tip clean, clean it every five minutes to prevent fluid from building up.
Be careful when applying as you don’t want to go over the areas that you will paint.
6. Let it dry for a while
It should be allowed to sit for at most five minutes before you do any work with it. You should not attempt to paint over it while it is still wet. It will stick to the paper and be difficult to remove.
You can tell when it’s not dry by noticing that the masking fluid doesn’t look sticky anymore. Let it dry completely before moving on.
7. Paint as needed
Once you have applied the masking fluid successfully, you can start painting without worrying about any parts you don’t want to paint.
Even if you do paint over the areas that you applied masking fluid, it doesn’t matter at all. The masking fluid acts to block paint from getting in.
You can paint whatever you like without worrying about the areas around it.
8. Remove the masking fluid
Once the top has dried, use your fingers to peel off the masking fluid. Begin by removing the top. As you remove it, it will begin to peel away slowly.
You could also choose to remove the thickest area, as it is usually the easiest.
Don’t go too hard on it. Instead, take your time to remove it slowly.
Masking Fluid Using Tips
There are some things you should know before you start using masking fluid.
These tips will help you use masking fluid more efficiently
1. Use it before you paint
Before you begin painting, make sure you have applied the masking fluid. Otherwise, it won’t do anything for you.
So, if you ever want to use masking fluid, don’t forget to plan out everything beforehand.
2. Don’t Let it Dry for Long
You should plan everything ahead of time, just like before. You will have a difficult time trying to remove the masking liquid if you leave it on the surface for too long.
Although it is possible, it is not the most pleasant.
3. Let it dry alone
You don’t have to use a hairdryer to speed up the process. You might have trouble removing the masking liquid if you do.
Instead, let it air dry naturally without trying speed up.
4. It should be removed
Many people make this mistake only for it to be discovered that they needed to remove the masking liquid once it was dry.
So, if you notice the masking fluid is dry, remove it slowly so that it won’t leave any marks behind.
Frequently Asked Question
Below are the most frequently asked questions about Masking fluid. These are common questions, so you might be able to find a solution for a problem you have.
What can you do instead of using masking fluid?
If you don’t want to use masking fluid, you could use rubber cement instead. The process is the same as using masking fluid. You have to apply it where you don’t want to paint over, and you need to let it dry before you paint over it.
How can you remove stubborn masking liquid?
We recommend that you wash the bristles with soap and water immediately after using them. You could also use your fingers to remove the masking fluid.
Can you use masking fluid on painted areas?
Yes, masking fluid can be used to cover areas that have been painted. It defeats the purpose of masking fluid. You should use it when you don’t want to paint over some areas.
What is a masking pen?
A masking fluid pen can be used to apply the fluid in a simple and reliable way. It can be easily wiped off without leaving any residues. You just have to use it on the surface that you don’t want to paint over.
How can you dilute masking fluid
Masking fluid can be sticky and thick. It is very difficult to dilute masking fluid. You can add water to it to increase its thickness.
It is very easy to use masking fluid in watercolor, as you can see. It takes very little time to apply and is easy to master once you have used it a few times.
The main drawback to using masking fluid is the fact that it can cause damage to your brush. But you can get around that by using a silicone brush or and old brush you don’t use anymore.
You can also use soap and water on your brush if you don’t want to damage it.
Now you don’t have to spend several hours trying not to paint over areas that you don’t want to.