What Is Scotch Tape Gun And How To Load It?

Are you ready for the big move into your brand-new apartment?

It’s time to start packing away soon then!

If you are preparing long-distance boxes, it is important to seal them properly. This will save you a lot of time and frustration.

For some, the entire process is left to the professionals.

Others prefer to tackle the difficult part on their own.

Hand packing scotch tape dispensers are a simple and effective way to ensure that the boxes reach their destination safely.

These tape guns are reusable, which is a great benefit. It also saves you a lot of time when packing. It can be difficult to load the tape, especially for those who are new to it.

You might also make mistakes?

Don’t worry! You don’t have to be an expert if you’ve ever had trouble loading tape rolls. Our step-by-step instructions will help you pack like a pro.

What is Scotch Tape Gun and How Does It Work?

Scotch tape gun can be described as a heavy-duty packaging tape dispenser.

The dispenser holds one roll of tape and has a hand brake mechanism that makes it easy to control. The dispensers can be reused by replacing the empty rolls of tape with scotch tap refills.

There are four types of tape dispensers on the market.

  • Handheld
  • Tabletop
  • Automated
  • Water-activated dispensers.
Also Read:  PETG Vs ABS- Which One Is Better?

Among these kinds, handheld versions are often referred to as “Tape Gun”.

Why do you need a tape dispenser

Before the tape dispenser was invented people used to manually peel the tape from the ends and cut it with scissors.

The standard scotch tape was very useful.

However, there’s a small catch to it.

The tape will not stick to itself. You will need to search for the tape’s end every time you want another box to be packed.

That’s why, the 3M’s sales manager, John Borden, decided that its standard clear scotch tape would be replaced by a brand new tape dispenser.

The upgraded version includes a built-in cutter mechanism that can hold the tape’s end and save you time by setting it up for the next time.

How to Load a Scotch Tape Gun

Step 1: Insert the roll

  • First, find the end of the roll tape. You can then throw it away before you transfer it to the dispenser.
  • Place the roll onto the dispenser so that the sticky side is against the cutting edge.
  • To make it easier, place the dispenser on a table or flat surface to give it a better grip.

Step 2: Remove the tape

  • Remove 0.25 to 0.0.5 inches of tape from the roll.
  • In this case, ensure that the tape unwind direction remains sticky side down

Step 3: Attach the tape correctly

  • Do you see the slot between your metal gate and the roll? That’s where you should be threading the tape roll in between.
  • If you feel that the area is too crowded, press the tab beneath the guide and keep it open to get a better view.
  • Remove any excess tape from the roller by pulling it under the roller. Make sure that the sticky side faces downward at this point.
Also Read:  3D Printing Business Ideas: Definitive Guide For Beginners

Step 4: Adjust the Tension of The Dispenser

  • Roll out approximately 5-6 inches of tape, and then cut it using the serrated blade. We recommend taping a small card box as a trial to see if it’s working properly.
  • Does the tape seem to be unwinding smoothly? If so, you are good to go. If you are not sure, then follow the next steps.
  • If the tape doesn’t roll out smoothly, it means you need to adjust the tension of the dispenser. You can adjust the tension of the dispenser by turning the spindle clockwise.

Step 5: Smoothly roll out the tape

  • The tape should now be smooth. However, if you have adjusted the spindle too tightly, then it’s a good idea to loosen it a little bit to have a comfortable unwinding operation.

Tips to make your task easier

It was so easy!

This method allows you to load a tape gun in just a few minutes!

To get the best results, there are safety precautions you should take and tips you can follow.

Let’s take a look at the guideline we have compiled for this purpose!

  • Do not load the tape onto the roll and then start using it immediately! Instead, try a test run to make sure the dispenser is properly loaded and adjusted.
  • Continue tightening and loosening the nuts until the tape is smooth. If the spindle is not tight enough, you will have to use more scotch tape.
  • If you are starting out with a big project, take a fresh roll instead of an old one so that you don’t have to stop mid-work and waste your time and effort to find another one.
  • The cutting blade of the cutter is very sharp. Be careful when using the dispenser and adjusting its tension.
  • We recommend that you pull at least 1-2 inches of tape to prevent yourself from cutting your own hand on the serrated blade.
Also Read:  How to Use Masking Fluid? with Video Guide

Wrapping it up

It may take more than two people to cut and use scotch tape simultaneously. Tape dispensers allow you to do it all yourself. It makes your job easier by making it easier for you to cut tapes efficiently and pack boxes in a more efficient manner.

However, if you don’t know how to load a scotch tape gun properly, the task might end up wasting a lot of your precious time.

That’s why we have collected all its and bits info on this matter and gave a detailed guideline so that your tape dispenser is ready to use when you need it the most.

Also, read:

We will be happy to hear your thoughts

Leave a reply

NRX Empire