Most people throw away their old clothes as soon as they notice that they’re old and faded. And you can’t really blame them.
To make it look fresh again, you can add colors.
This article will show you how to dip dye fabric to revitalize a worn-out cloth.
To dip dye like a professional, read from top-to-bottom!
Dip Dye Fabric – Comprehensive Guideline
You can do so many different things with fabric dyes. This is the perfect tool if you love to try new things and are creative.
The best part is that it’s not as hard as you might think. Just follow these steps to get amazing results.
These are the steps that you need to follow to dip dye fabric like professionals:
Set Up the Workspace
Protect your floor and other surfaces before you do any work.
Your T-shirt will drip everywhere so make sure to cover it all.
If dye makes you feel sick, you can open a window or turn on a fan. Alternatively, you can work outdoors if you don’t like being in a room.
Take as much time as you need to set up your workspace properly and remain safe.
Gather the tools
The process is very simple. To properly dip dye fabric, however, you will need some tools. These tools are common tools. This should not be a problem.
A container is necessary to dye your fabric. This container will be where the magic happens and will be where you spend most of your time.
It doesn’t matter what container you use. It doesn’t matter what type of container you use, as long it does the job.
Gloves are also necessary to protect your hands. If you don’t wear gloves, you will end up with dye all over your hands, and it can be quite annoying to remove. Wear gloves during the entire process.
A clipping hanger is the last. This is the most important. This is where you will hang and dip your clothes.
Wash the Fabric
Before you attempt to dip-dye your fabric, wash it first.
It is best to set the right temperature for the fabric that you want to dip dye. Then you will need to drain all the water.
It should be damp but not dripping.
This step is essential and cannot be skipped. It is important to wash the fabric before dying it. This will remove any coatings that might prevent the dye from reaching the fabric.
Boil water and pour it
What you want to do here is heat water up to 140°F. But you don’t want it to be too hot to the point that you can’t handle it. The water should be hot enough that the dye can be dissolved in the container.
Once the water is sufficiently hot, you can pour it into a container. It doesn’t really matter what type of container you use. You should remember that any dye you pour into the container will stain it.
So, get a container that you don’t care about.
When you’re dyeing cotton, you must add some salt to help the dye work better. However, before you do this—we highly recommend reading the back of your can. You might not need salt for each brand.
Get the Dye!
Before you add the dye to the water, shake off any dye that is in a plastic container. This is where you simply need to add the color to the water. You can choose how much dye to use.
You will need to add more dye if you want a darker fabric. You can add less color if you want a more dense or bright result.
From here, you will need to give it a stir. Keep going until the dye has dissolved in your water.
Try the Color
It is highly recommended to test the color before you buy. It can be hard to tell what color is inside a container.
You will need a napkin to zip into the water. This is the best way for you to ensure that the color you want is in the water.
You can add more dye if the color seems too pale. If it is too dark, you can add more water.
You can also curl slowly so you can see the final result. Drop it gradually, rather than dropping it all at once.
Dip the shirt
The dye container should be emptied of the fabric. You will need to give the dye container a clear message so that the dye can quickly penetrate the fabric.
Now all you need to do is let it sit in the container for around 20 minutes.
To achieve an ombre effect, simply dip the fabric’s top. The dye will slowly absorb into the fabric. To get more ombre, lower the material.
Eliminate the Excess
You are now ready to extract all the excess after 20 minutes.
If you are only dyeing one side of your fabric you can run water on it. This will prevent the dye from getting on the undyed portion.
At this point, you’re almost done. But, before you move on to the next part, you will need to run warm water through your fabric. Only run water on the dyed area.
Wash the Fabric
You must wash the fabric with your washing machine to ensure everything is in order. It is important to wash the fabric before you wear it. Simply set the temperature to cool and wash the fabric.
Dry the Fabric
Once you have washed the fabric, hang it dry. You could also dry it in your dryer. You can do it either way.
Always wash the dye with cold water to ensure it does not fade. Your dye could become nothing if it is not washed with cold water.
Frequently Asked Question
Still unsure? These are some questions that you might find helpful:
How do you dip-dye large pieces of fabric
A large container is the best way to dip-dye large pieces of fabric. You will need to add the dye and water. Let it sit for around 20 minutes, then rinse it off. Once that is done, hang it to dry.
Can I use food coloring for fabric dye?
You can dye fabric with food coloring. You can achieve stunning results by following the same steps as with commercial fabric dye.
What dyes can I use for fabric?
You can use many different things to dye fabric. You have the option to buy dyes for fabric, such as commercial fabric dyes or food coloring.
How can you darken faded black clothing?
The easiest way to restore your faded clothes is to add ½ cup of salt inside your washing machine. This will remove any detergent residue from your fabric. This will make your clothes look new again.
How can you dye fabric with bleach using dip dye?
Add bleach to the bucket and fill it with water. After that, you can place the fabric in the bucket and let it sit for 20 minutes. The fabric is now ready to be dried. Don’t forget to be careful as the material is still filled with bleach.
It is not as difficult as you might think. It is possible to do it with the right tools.
It is a great skill to be able dye your clothes yourself. Sometimes you might not like what you see in a shop.
Sometimes socks you like might not be the right colour. It can be difficult to find colored socks.
Now that you know how dip dye fabric, you are able to add subtle colors to your clothes and see the results!