How to lubricate an electric razor properly? And what to use?

Whether you’re a first-time shaver Whether you’re a new user or an experienced user, you should know how to lubricate your electric blades.

Is your shaver noisy and shaky The motor runs slowly? It makes it difficult to shave your head and can even cause pain. For a head replacement, you pay about 40 bucks every three months. It’s lubrication time.

Notification: If your shaver comes with a cleaning station as a default, you don’t need to use any lubricant. The cleaning station will do it perfectly.

We review products independently, but we may earn affiliate commissions from buying through links on this page as an Amazon Associate.

Why should you oil your electric razor?

With an electric razor lubricant, you’ll get the smooth operation of a brand-new shaver back. It will make shaving pleasant and cost-effective.

  • The protective barrier created by the electric shaver lubricant is between the razor parts. It reduces friction between foil and blades. Reduces heat As a result. This will give you a comfortable shave Without skin irritation or razor bumps
  • No more squeaks or loud sounds. Your electric razor is now silent. Do it again, but quietly It should.
  • It prolongs the lifespan of the foils and blades. A good lubricant can reduce the wear on the cutters. It slows down the corrosion between foils, blades, and lubricants. In this way, the foils will last wayyy longer and you’ll need fewer head replacements.
  • It takes over the motor burden. A part of the motor’s power is lost due to resistance between the cutters. This is where the lubricant can help. This will Speed up the motor This will ensure a shave that is both smooth and gentle on your skin.
  • Be smart about your power consumption Increase your battery life.
  • Combine the less generated heat with the restored motor speed and you’ll get Comfortable close shaving.
  • Keep your blades oiled Protect them from rust They will be kept sharp.
Also Read:  Manscaped Vs Brio Beardscape for Manscaping & Beards

What makes an electric razor oil lubricant a good one?

The perfect lubricant These are the requirements for your shaver:

  • It must withstand extreme temperatures.
  • The lubricant you choose must be light and thin. High-viscosity stuff can cause problems with your electric razor.
  • It must be stable in all environmental conditions. Some vegetable oils, such as linseed oil, can be oxidized or changed into a solid-state.
  • It is non-toxic to your skin and your body. You can use the material safety data sheet (MSDS) if you’re uncertain. It contains all safety information for a product.
  • What can I use for lubricating an electric razor?

    There are two options for lubricating an electric razor. You can use either low-viscosity oil or any substitute oil to lubricate your electric razor.

    You can also use a spray lubricant It is capable of cleaning and lubricating the gizmo. 

    First, you have the option of using electric razor oil

    There are many questions on forums about whether or not to use a certain oil for an electric razor lubricant. To answer these questions, I will briefly discuss two types of oils.

    #1.Mineral oils (food-grade mineral oils)

    They are light oils that have a high level of refinement and no color or odor.

    Most electric razors (like Braun and Panasonic) come with a tiny mineral oil bottle.

    Examples:

    #2. Edible vegetable oils

    These oils are often extracted from the seeds or fruits of vegetables and fruits, as their name suggests. Vegetable oils have lubrication properties due to their high viscosity, which can reduce wear.

    Also Read:  Philips norelco 3100 review: do not buy before reading

    Examples

    So who’s the winner here?

    Mineral oil It is the best shaver oil lubricating oil. It fulfilled all of our criteria for a good razor lubricant. It protects the moving parts from friction and wear by coating them with a protective coating. It also doesn’t attract loose stubble or debris that can gum up your razor. Add to this that it’s safe on sensitive skin to reduce the risk of irritation or ingrown hair occurrence.

    However Vegetable oil It is safe, but it can cause damage to your clipper. It’s very thick which encourages dirt build-up. It’s also unstable under different temperatures and many types are prone to oxidation (rancid oil formation). These types are called “drying oils”.

    Electric shaving lubricant replacements

    These are some great alternatives to electric razor oil.

    1.Wahl Clipper Oil

    Check The Latest Price on Amazon

    This product is highly recommended and will provide quiet operation with sharper blades. It’s a cinch to use with a drip nozzle. But, it is important to remove the tip before you use it. This large size is a great bargain at such a low price.

    2.Oster Premium Blade Lube

    Check The Latest Price on Amazon

    Another smaller size clipper oil. Amazing performance. Some customers complained about leakage issues after the package arrived.

    3.Braun Shaver and Appliance Oil

    Check The Latest Price on Amazon

    This is a Braun shaver oil substitute if you’re virtuous and want to play it safe with your premium Braun shaver. It is almost identical to the factory oil. However, it is more expensive and has a smaller volume.

    Also Read:  Can I use Nair on my back? Men’s back hair removal cream guide

    How to oil an electric razor

    It’s easy to oil your razor. 

    For foil shavers

  • Make sure your shaver is Completely dry Before you begin. Allow your razor to dry completely after you have washed it.
  • Add a tiny bit of mineral oil to the dish. The center of each foil is from the outside (The business side). Oil applied to the foils’ backside would allow the razor to become clogged with the whiskers.
  • You can repeat the previous step by applying a single drop to the pop-up trimmer.
  • Run the drop of oil in the two directions to let it spread evenly across the cutting elements
  • Turn on your foil shaving razor and leave it on for 30 seconds.
  • To remove excess oil, use a cotton swab or a paper towel.
  • .ugb-94118ee hr.ugb-divider__hr{background-color:#000000 !important;width:25% !important;margin-left:auto !important;margin-right:auto !important}

    For rotary shavers

    It’s no different here. Repeat the above steps, applying 1-3 drops to each shaving head, and then run the shaver. It’s that simple!

    .ugb-c4e913c hr.ugb-divider__hr{background-color:#000000 !important;width:25% !important;margin-left:auto !important;margin-right:auto !important}

    For hair clippers

    Oiling clippers

    You need to use the “ 5 Point Oiling “ as Wahl suggests. These five points are where you should apply hair clipper oil.

  • Place 3 drops of the oil on the top edge of the clipper blade. One in the right corner; one in center; one on the left. [3 points]
  • Place one drop of each side on the bottom edge of the top-blade. [2 points]
  • Turn on the clipper, and after a few seconds, turn it off. This will allow oil to distribute evenly.
  • Use a paper tissue or a soft cloth to remove any excess oil and you’re done.
  • The second option: Silicone spray oils for electric shavers

    Spray lubricants make it possible to clean all types of shavers, hair clippers, and beard trimmers. They are made with silicone grease and isopropyl Alcohol for deep cleaning.

    They will remove skin oils, minerals and dirt stuck to the razor blades. Spray lubricant reduces friction and wear. This means you’ll get the most out of your razor.

    Best spray lubricants

    If you’re considering this option to lube your grooming tool, here are my top choices.

    1. ShaverAid Spray

    Check The Latest Price on Amazon

    This is my favorite cleaning product. Your shaver’s performance will be flawless. It increases the motor’s speed and overall performance. It has a refreshing vanilla scent that I like.

    2. Remington Shaver Saver

    Check The Latest Price on Amazon

    This’s a very effective and affordable option that will prolong the life of your foil and keep the cutter blades super sharp. It has a pleasant smell, which is a bonus.

    3. Andis Cool Care Plus 

    Check The Latest Price on Amazon

    This spray is very popular with barbers. It smells wonderful. This is the best option if you live in Europe as it is easy to find.

    How to lubricate an electric razor using spray lubricants

    If you use a foil shaver:

  • Remove the cover from your razor.
  • Gently brush out the foils with a small narrow brush to clean the beard dust or you can use a can of compressed air instead.If you’re a wet shaver who uses a shaving cream or a shave oil, use hot water and hand soap to clean the shaving head. This will remove any oil residue.
  • Make sure your razor is clean Totally dry Before applying the spray. If you don’t have time to dry your hair, you can use a hairdryer.
  • Hold the can near the razor head and spray the foils or blades generously.
  • Place the head back in its original position and turn on the razor to allow the lubricant evenly spread.
  • .ugb-81b8aeb hr.ugb-divider__hr{background-color:#000000 !important;width:25% !important;margin-left:auto !important;margin-right:auto !important}

    If you use a Rotary razorNow, remove the shaving brush and repeat the process. Keep this in mind Lay out each cutter and the corresponding blade in an orderly fashion. This will allow you to place each pair in the proper position.

    .ugb-a33f605 hr.ugb-divider__hr{background-color:#000000 !important;width:25% !important;margin-left:auto !important;margin-right:auto !important}

    Spray lubricants offer a better alternative to electric razor oil. They work as a lubricant, and cleaner, mineral oils will lubricate your razor faster.

    Both are great. However, if you prefer dry shaving, mineral oils and warm water will suffice for oiling and cleaning.

    Spray lubricant can be more convenient when used with wet shaving.

    How often should your electric razor be oiled?

    After every shave, oil your electric razor. It is best to oil your electric shaver at least twice per week. The frequency at which you need to lubricate the blades and inner parts depends on how often your razor is used and how you clean it. 

    Soap would strip the oil from the foils or blades of your razor. I recommend that you lubricate your razor after every use, whether you use wet shaving or soap-cleaning.

    Can I use baby oils to lubricate my electric razor heads?

    It is simple to use. Baby oil is a mineral oil that has a scent added. So there’s no problem using baby oil in your electric shaver lubrication unless you hate its scent. 

    The safety data sheet for baby oil can be viewed here here.

    Is sewing machine oil similar to Clipper Oil?

    No, sewing machine oil does not contain the same ingredients as clipper oils. Sewing machine oil is a mixture Teflon (PTFE), Kerosene and paraffin oil. Paraffin oil is the only common component. The safety data sheet for sewing machine oil recommends that you avoid contact with skin, unlike clipper oil. Although its great lubrication performance, it’s not safe to use on your skin. 

    Can I use wd40 to clean my electric razor?

    No, you cannot spray wd40 on your electric razor. A can of wd40 Spray contains petroleum base oil and hydrocarbons. Hydrocarbon, a water displacer, can cause deformation to your electric shaver material. It can also cause irritation and dermatitis when it comes in contact with your skin. To make matters worse, wd40 contains a strong stench of petroleum.

    Can you use 3in1 oil to clip your hair?

    No, It’s not recommended to use 3 in 1 oil on your hair clippers. It’s a petroleum-based oil that can harm your skin and cause defatting dermatitis and irritation with repeated use.

    Is it possible to use olive oil with my electric razor?

    Olive oil is too thick to be used on an electric razor. Extra virgin olive oil is not stable against oxidation. It turns into a gummy mess and can clog your razor. Mineral oil can be used instead.

    Can you use coconut oils on an electric razor?

    Coconut oil is a vegetable oil with high viscosity. It can also not withstand heat. This will cause your razor to become brittle and reduce its performance. Mineral oil is a better option.

    Verdict

    It is extremely beneficial for your electric razor. It improves the motor’s performance, protects the blades against getting dull and speeds up the razor’s speed. It will provide you with clean, comfortable shaves and prolong the life of your foils.

    Do yourself and your razor a favor and make sure you lubricate it regularly.

    Resources

  • Sewing machine oil MSDS
  • WD40 MSDS
  • 3-in-1 oil MSDS
  • We will be happy to hear your thoughts

    Leave a reply

    NRX Empire
    Logo