Does Lock Picking Break Locks?

If you’ve misplaced your lock keys, lock picking is one option you want to consider. And while it’s helpful, you’re probably unsure of your lock’s status after picking it. I get it; it’s okay to be worried—after all, some quality door locks do not come cheap.

If you’re wondering if your lock can still function correctly after picking it, this article contains every piece of information you need. Let’s get started!

Is it possible to pick a lock?

While lock picking doesn’t break locks, it can cause damage if done poorly. A locksmith could be hired to open your lock to prevent any damage.

That said, if you’re interested in learning more about lock-picking, this article contains more valuable information for you. Let’s dig deeper!

How do you choose a lock correctly?

You will need the tools to properly pick a lock. These are the essential tools for lock picking.

Lock Pick: This tool is used to push a lock’s pins to the shear line, which is part of the lock picking process.

Tension Wrench: This tool comes in an L shape, and it’s used for rotating the plug in a lock as the key does. It also holds the pins at their shear line during pick to prevent pins from returning to the plug.

Now that you have all the tools, here’s how to pick a lock correctly:

  • Step 1: Insert your wrench into the keyway and try to exert a little pressure towards the direction you turn the original key—usually clockwise. Ensure you don’t force the wrench in the direction of turning a key, you only need to apply a bit of force.
  • Step 2: Hold your wrench in your hand as described in step 1. Insert your rakepick into the keyway. Push it up to the back.
  • Step 3: Using your rake, apply pressure on the pins—this should be upward of the pins. Next, gently snap out the pick. Make sure to bump all pins as you go.
  • Step 4: If the above steps are correctly done, most of the lock’s pins will set at the shear line and the plug will also rotate slightly. You may not notice this rotation if you’re a beginner, so proceed to the next step.
  • Step 5: You need to scrub the lock’s pins again by inserting a pick into the keyway to the back of the lock. You can see that the pins have been set by repeating step 3.
  • Step 6: After cleaning the lock, you should be capable of opening it. This will allow the pins to be set. If your lock remains closed after the scrubbing, let go of the pressure and release the wrench to see if they drop. If there’s no drop, it means you probably applied much pressure on the wrench and you may have to repeat the entire process.
Also Read:  Schlage Lock Not Working After Battery Change? (Solved!)

NotificationThere are many advanced tools and methods for picking locks, most commonly used by locksmiths. But we’ve presented the most simplified way to pick a lock, especially for beginners. If you’re not able to use this method to pick your lock, we advise you to get a locksmith for a proper picking that won’t damage your lock.

Is Lock-picking Illegal?

Anyone can learn lock picking and make their own locking picking tools. The process isn’t illegal as long as you don’t do it with any malicious intent.

Misplacing keys can happen to anyone, and you’d be locked out if you don’t have the keys to your front door. Lock picking is a great option. If you’re able to pick a lock, and you have the right tools to do so, you can quickly set them to work and gain access to your home. A licensed locksmith can also pick your lock.

However, lock picking is a method burglars use, which is why some people view it as a crime. So lock picking is not without downsides, but that doesn’t make it illegal.

While most countries allow anyone to use lock picking tools, some states only allow licensed locksmiths. Lock picking is legal or illegal depending on where you live. See lock picking rules per State The USA.

How to tell if your lock was picked?

As previously mentioned, intruders also use lockpicking to commit other criminal acts. If you suspect your lock might have been picked, here’s how to verify:

1. Key Turning Difficulty

If you could turn your lock easily to lock it while leaving the home but difficult to open it on your return, it’s a sign that your lock might have been tampered with. If a wrong key was used to open your lock, it may be difficult to lock or unlock it.

Also Read:  8 Best Remote Control Floodlights for Home security (2022)

Of course, burglars have bump keys and lock picking tools that could alter a lock’s pins, making it difficult to lock and unlock with the original key. If you notice this, it is important to immediately change your keys. Continue reading securing your front doors.

2. Scratches on Your Deadbolt

A burglar could cause visible scratches to your keyhole from trying to pick your lock. If your lock has no scratches and you eventually notice some, it’s a sign that someone tried to pick your lock.

You should always check your lock for any suspicious scratches and get a replacement as soon possible. Continue reading forced entry attempts.

3. You are missing spare keys

While this may not be directly connected to lock picking, missing spare keys could also indicate that someone is trying to break into your home and this can happen without traces if you don’t check your spares. Burglars could get your key and rekey it to gain entry to your home.

If you’ve misplaced your spares, a rekey may not be the best option. To prevent unauthorized entry, you can get a new key.

FAQs about Lock Picking

Is it legal for me to buy a lock pick set.

Generally speaking, anyone can own lock picking tools, but it’s been regulated in some States in the US. So check to see if you’re allowed to own lock picking tools before you go for them.

Can you pick the right smart lock?

Lock picking can be done by a keyhole. Smart locks with keyholes are also possible to pick. But they’re smart locks without keyholes, and those can’t be picked.

Also Read:  Top 10 Reliable Schlage Door Handles

What household items are good for picking locks?

A screwdriver, hairpin and paper clip are all common household tools that can be used for picking locks. To use these tools effectively, you will need to be skilled in lock picking.

What locks can’t be picked?

All locks with keyholes are pickable, but locks with advanced pick-proof features like Smart Key Security. Keep in mind that lock picking is a sophisticated method that can bypass security, provided the lock has keyholes. So locks that can’t be picked are those without keyholes.

Can a Medeco lock been picked?

Medeco locks can be picked just like any lock with keyholes. Medeco locks come with six pins and an antipick shield, making them difficult to pick.

To conclude

You probably found this post based on this search query—’does lock picking break a lock‘? We did provide a succinct response above.

To recap, lock picking won’t break your lock if done correctly. But the reverse may be the case if it’s not done correctly. While lock picking is a DIY thing, you want to have a locksmith pick your lock if you’re not sure of doing it correctly.

Some laws in certain countries/states prohibit individuals from owning lock picking tools. If this applies to your situation, a locksmith will be able to pick your lock for you.

We will be happy to hear your thoughts

Leave a reply

NRX Empire
Logo