If you’re a fan of art crafts, then you’ll love block printing. You will need the right block printing materials to make it possible.
We know that it can be difficult for people with little or no knowledge to find the right supplies. We compiled a list of the most important items to be aware of. But first – let’s go a little deeper into block printing.
What is Block Printing?
It is possible that you have never heard of it before.
It is possible to create stamps, relief prints, linocuts and rubber stamps using wood and ink. As long as you have a block of wood, linoleum plate, or a rubber stamp – then you can print something on it and create art.
Block-printing, a Japanese cultural practice, can give you a better understanding. People used it to create art like “The Great Wave off Kanagawa,” the “Plum Garden in Kameido”, and even the “Bathhouse Women.”
Depending on the materials used, this art can last many centuries. If you want to make something similar that possibly goes down in history as one of the greatest pieces of art –block printing is for you. So let’s explain what supplies you need to get the most out of your block printing:
1. Blocks & Linoleum
First and foremost, you will need to obtain a block in order to print. You could use any type of wood, including softwoods, hardwoods and MDF. Linoleum is another option. Rubber is also an option. Different results and uses will result in different results. Before you make a final decision, you must know what you want. Here’s a better idea of what each one offers:
Softwoods, such as pine and cedar, are just a few of the many types of woods that you can use. Then there are hardwoods like cherry, ash, and birch. Finally, you will find wood alternatives such as plywood and MDF.
It is important that you know that softwoods can be more difficult to carve than hardwoods. However they are also easier to hold prints for longer periods of time and can be too fragile or fragile for complex prints.
A piece of hardwood is durable. Although it is more difficult to make a print with hardwoods, they are stronger and last longer.
If you don’t want to use softwoods or hardwoods, then MDF or plywood can be more affordable choices. Both of these options are more fragile than softwoods, and more difficult to use.
MDF, for example, can crack quite easily. If you aren’t careful, you may break an MDF block by mistake. And because MDF doesn’t have grain, it is harder to leave a print and/or detail its surface.
Plywood is, however, more durable and harder. It won’t break easily, thanks to its sturdy composition. Plywood also has grain so it can take a lot of detail. A good plywood might even have a smoother surface, making it easier to print.
If you feel that a wooden block is too costly or unnecessary, you can opt for rubber blocks. These blocks are made for carving and stamping making them perfect for block printing.
Rubber blocks are soft and have many advantages. This allows for effortless carving and still allows for great detail in printing.
It is easy to ruin the rubber print because it is so soft. If you’re not careful, you may end up carving more than necessary. This can lead to a ruined block.
Rubber blocks are excellent for stamping. They also work well for standard printing.
Linoleum is also known as lino. It was originally created for use as a floor covering. However, linoleum pieces are also suitable for block printing due to their strength and design.
This material has one the most smooth surfaces on the market. It is not easy to carve. Lino is not easy to work with but it is still one the most affordable materials for the quality.
It provides exceptional detail and makes stamping and other printing methods look amazing. Large pieces can be used to create long-lasting art. With small linocuts you can make stamps or the like.
You will need special tools or gouges to carve lino. It’s similar to carving on hardwoods so patience and patience are required. But due to the smooth surface it offers, it also leaves a lot more space to mistakes – so it should be done with extra care.
Lino is a great option for those who are looking for a durable, affordable piece. However, it can be difficult to carve.
2. Carving Knives & Gouges
Once you have a block of wood to carve, you will need the carving tools. Here’s where the knives and gouges enter into action.
A carving knife is a small, precise blade that cuts wood easily. This blade can hold different sizes and shapes. These small blades have one purpose: to add more detail to the piece. Most knives are used for detailing, not removing wood.
Gouges are used to remove large pieces of wood. They come in a variety of sizes and shapes so you can choose how much material to remove. Some are V-shaped for straight cuts while others are U-shaped to make rounded cuts.
If you’re going to do some block printing, then you’ll need carving knives or gouges to get the design/print you’re looking for in the block.
3. Brayer or Roller
Once you’ve done the carving on the block, then you need to pour some ink on it. But pouring alone won’t do the job – as you will end up wasting ink and messing up the whole print in the end.
That’s why you need to use a special tool called brayer. It is also known by the name of the roller and its sole purpose it to spread ink on the block.
You can use them to spread ink uniformly due to their soft design. This allows you to get better prints and prevents messy prints on any surface.
4. Block Printing Ink
But how can you spray ink with a brayer if you don’t have the ink?
That’s where the printing ink This is where the fun begins.
This ink does not look like any other ink. It can be used as a printing ink or block-printing ink. It must be a consistent consistency and thickness so that it adheres well to all surfaces, including paper. This is how it should look. printer ink remove from carpet post These are some additional tips to help you remove printer ink quickly.
At the same time, this ink needs to be water-soluble, so cleaning it from the block (rubber, wood, or linoleum) doesn’t take much time or effort. Sure enough, you’ll find this ink in a wide array of colors.
5. Baren or Press
Last but not least, you’ll need an additional printing supply Also known as the baren. This is the piece that you place on top the linoleum or wood block.
What this support does is press the block into a surface whenever you’re printing something. Just after spraying a block with ink, you’re ready to press it over the surface. The baren is what you use for printing the thing.
Baren are unique because they provide uniform pressure and properly distributed pressure without causing damage. While you may also use things like spoons, books, or other blocks – nothing compares to a baren or press.
Get your Block Printing Supplies now!
If you’re looking to start some block printing, then you need all the necessary supplies. Luckily, they aren’t that many or expensive.
Block printing supplies are necessary to get started. printing attractive and durable designs on fabric, wood, paper, or any other surface – then follow this guide to the letter. You won’t miss a thing!