Top 6 Best Glue for PLA Plastic – Reviews and Buying Guide

Did you know that 3D printing’s market share is expected to hit almost 35 billion USD by 2024? There’s no doubt that 3D printing is a steadily growing industry.

If you’re into 3D prototyping with PLA, you likely understand the significance of bed adhesion. If your prints do not adhere to the build plate they will wobble, and then come out distorted and warped.

The final product will be ugly and not the model you envisioned.

Are you aware of the steps you can take to avoid these problems?

The best glue for PLA. I mean an adhesive that is simple to put on the printer bed and durable enough to hold the prints in place for efficient printing.

Cyanoacrylate glue is the best choice for bonding PLA pieces. This guide is intended to help you avoid bad glue. find the right glue.

You want a product that will not warp or wobble and produce amazing prints, just like the ones you have designed. I mean high-quality adhesives that are water-soluble and easy to remove when you’re done.

Let’s jump in.



Editor’s rating


Magigoo All-in-One 3D Printer Adhesive


5 out of 5

Check Price

Layerneer 3D Printer Adhesive


5 out of 5

Check Price

FYSETC 3D Printer Glue Sticks


4.5 out of 5.

Check Price

Loctite Ultra Gel Control Super Glue


4 out of 5

Check Price

ACEIRMC 3D Printer Glue Sticks


4.5 out of 5.

Check Price

Our Top 6 Recommended Best Glues for PLA

1. Magigoo All-in-One 3D Printer Adhesive

Magigoo is a brand of Thought3D Ltd, a company with major interests in the R&D sector. The use of high-quality materials vast knowledge in 3D printingThe company also offers the best glue for PLA on the market. 

Magigoo All-in-One is the perfect glue for a variety surfaces. 3D Printer Adhesive would be a perfect choice. It can also be applied to Kapton, PEI, glass and even buildtak.

This product, which comes as a 50ml container, works well with PLA and other 3D printing materials.

It can be used for ABS, PETG, HIPS, etc.

This product is very easy to use. Simply shake the tube and give it a gentle push.

This adhesive is also cost-saving. It sticks well and is strong. It does not have to be applied to the entire print bed. Only the active area should be covered.

Is it possible to store 100 prints in a 50ml container? This is a great deal, if you ask me.

Yet, the adhesive power of this glue is remarkable. This glue holds your models so securely that they won’t move or warp during printing.

The best thing about the product is its safety. It is not flammable, and it doesn’t come with a bad smell.

Highlighted features

  • Versatile – use it with PLA, PETG, ABSTPU, and many more
  • Compatible with different surfaces – Kapton, glass, PEI, and more.
  • Economical – holds up to 100 prints.
  • Strong and effective – provides a very firm hold to prevent warping/moving.
  • Safe – odorless and not flammable.
  • Easy to apply – just shake and press.

Check Price On Amazon

2. Layerneer PLA Glue

It is not easy to find a 3D printer glue that does exactly what you want. Most products either don’t hold reliably or they don’t release efficiently and cleanly. Some end up clogging the nozzle and ruining prints.

You’ll face none of that with the Layerneer 3D Printer Adhesive.

This product is a real charm. It holds the prints in place when heated. When the temperature drops, the glue will release its grip.

Amazingly, the product leaves no residue. There is no need to worry about your nozzle becoming blocked or prints getting stained or damaged.

If you’re looking to keep the printing cost to a minimum, here is an adhesive that supports your goal. First of all, you only need a small amount of glue. Secondly, can you believe that you can actually recharge the adhesive you’ve already used?

Here’s how that works – you gently swipe a damp sponge over the already used glue that is remaining on the print bed. It will activate the glue and make it usable again.

It’s amazing to see that recharged glue works as smoothly as the unused glue. Isn’t that cool?

Getting rid of the glue from the print bed when you’re done printing is a piece of cake. Water-soluble products can be washed with a damp towel.

If you’re looking for a 3D printer glue that you can use with PLA, ABS, and PETG, this is the product to purchase.

Highlighted features

  • Sticks and releases effectively.
  • Doesn’t leave a residue or clog the nozzle.
  • Cost-effective – a little goes a long way.
  • Used glue can be recharged with a damp sponge – reduces the cost.
  • Water-soluble so they are easy to wash off.
  • It is low-odor and poses no problem.

Check Price On Amazon

3. FYSETC 3D Printer Glue Sticks

PLA glue should be easy to use and not cause any problems. These are the reasons why FYSETC 3D Printer Glue Sticks is worth buying.

These sticks are unique because they can go a long distance. The three sticks can be used together to create dozens, if not hundreds, of prints. It all depends upon the size of the print, but the glue has a large coverage.

Many brands offer their glue in a single container. This might not be ideal for you if you prefer to carry the glue around. FYSETC sells their product in three tubes. You can take the tube with you and leave the rest at home.

That way, you don’t have to carry the glue every time you go to or from school.

The idea behind the three sticks is great because even if one stick is damaged or contaminated, you still have two.

The tubes are also very easy to use, according to the manufacturer. Simply open the lid and rub it on the print bed.

Thankfully, the glue is very effective, so you needn’t apply it to the whole bed surface. It will only be necessary to apply the active parts.

FYSETC 3D printer glue sticks are a high quality product. They are very comfortable to use. They are easy to clean and do not have a strong smell. To remove glue from your printer you will only need to use damp paper towels.

Highlighted features

  • Durable – the three sticks can last over 100 prints.
  • The glue sticks well on heated beds and is easy to release when heating stops.
  • It does not emit toxic/pungent odours.
  • Effective – holds the models securely.
  • Easy to clean using water.

Check Price On Amazon

4. Loctite Ultra Gel Control Super Glue

Finding a product that fulfills all your needs is not an easy task. There is one product that does everything for you.

Loctite is a well-known brand. It has just the product you need to keep your prints in place – the Loctite Ultra Gel Control Super Glue.

Ultragel is well-known for being the best product to fix broken items at home or in the office. You may not know that Ultragel is also very effective. 3D printing. How does it work?

The product includes a patent-pending applicator. The applicator is cleverly designed to allow you to apply glue precisely.

Unlike other products that come in difficult-to-use tubes, this glue’s tube is extremely easy to use. Simply press the sides to squirt liquid.

Fortunately, when you stop pressing, your product stops flowing. This avoids wastage and ensures you don’t end up with a mess. It’s easy to apply the adhesive to only the areas you need with this unit.

PLA glue is strong and durable. It’d be so inconvenient for the models to move while you’re busy trying to come up with the perfect prints.

Loctite Ultra Gel Control Glue is a popular choice. Rubber-toughened makes the glue one of the strongest on the market. It will not be affected by vibration or impact.

Highlighted features

  • Multipurpose product – for 3D printing and fixing broken items.
  • Patented applicator reduces wastage
  • Tube has an EZ-squeeze side pressing design for easy application.
  • Rubber-toughened formula that holds extremely securely

Check Price On Amazon

5. ACEIRMC 3D Printer Glue Sticks

When doing 3D printing, you want your parts to be attached firmly to the print bed so that there’s no warping or bending. That’s how you come up with beautiful shapes.

Aceirmc is dedicated to helping you achieve your goals. Its glue is strong enough to hold items in place so that they don’t move during printing.

Aceirmc glue has a unique feature that can be used again and again. Once you’re finished with one print, you don’t have to reapply the adhesive. Simply heat the print bed and apply the previous application. Your items will still stick to the print bed.

The best part about this product is its ease-of-use. Simply open the lid and rub on the print bed. There’s truly no complication in using this product. You can simply seal the stick by removing the lid.

The design of the sticks makes them a good option for someone who’s constantly on the move. You can just carry one stick with you on the go and leave the rest at home.

When seeking the best glue for PLA plastic, you’re not just looking for something that holds. It should also be easy-to-remove.

Aceirmc has got you covered. It is extremely easy to remove the adhesive from the build plate. You will need water and a soft-bristle toothbrush.

Highlighted features

  • It is easy to use and has good viscosity.
  • It sticks solidly and resists warping and bending.
  • The application process is simple.
  • Cleanse efficiently the build plate.

Check Price On Amazon

6. Bob Smith offers Insta-Cure

Are you serious about creating the most stunning 3D models? Next, you need to ensure that your prints remain in place during printing. This means you have to look for the best glue on the market. What else is there but the Insta-Cure by Bob Smith?

This unit is undoubtedly the strongest when it comes to strength. This product is like superglue with steroids.

The adhesive sticks strongly when heated. You can be assured that your parts won’t move, regardless of how vibrations.

A versatile 3D adhesive will be a good one. It can be used with other filaments as well as PLA. This is exactly what Insta-cure does. This product is compatible with PETG, ABS and almost all other types of drugs. 3D printing filament.

Other than the 3d printing businessThe glue can be used in many ways around your home and office. It’s a reliable adhesive for fixing a range of items including paper, wood, rubber, plastic, clay, and so on.

Are there cracks or chips on your granite countertop? This product is what you need to fix them. Its versatility is amazing.

It is easy to apply. It is easy to remove the cap and squeeze the gel out. The applicator is designed to ensure precise streaming and avoid making a mess.

Highlighted features

  • For a firm hold, use super strong glue
  • Versatile – works for PLA, ABS, PETG, and more.
  • Precise-tip applicator.
  • It can be used to stick a variety of items at your home or office.

Check Price On Amazon

Comparison Table Glue for PLA


Capacity (oz).

Number of prints per tub

Supported filaments

Magigoo All-in-One



ABS, PETG (Platform), PLA, HIPS & TPU

Layerneer Adhesive




FYSETC Glue Sticks

2.2 (0.74 a stick)



Loctite Super Glue




ACEIRMC Glue Sticks

2.2 (0.74 a stick)



Bob Smith offers Insta-Cure




Guide to Buying Glue for PLA

If you’re into 3D printing, and you like to create quality prints, glue is a must-have product. You can apply it to the bed to ensure your items stay stable so the filament is laid down as accurately and accurately as possible.

However, not all glues are appropriate for 3D printing. To be approved for 3D printing, the adhesive must have certain qualities. It must stick well and be able to release without a hitch.

To make sure what you’re getting is the best glue for PLA that you need, be sure to consider the following factors.


I don’t know if you’ve ever used an adhesive that would barely stick items, have you? It can be very frustrating. Consider this: printing involves vibrations as well as temperature fluctuations. These factors can cause adhesive to fail.

When shopping for adhesive power, it is important to choose a product that has a high level of adhesion. It must be strong enough to hold the models in place. Because you see, if the glue releases while you’re printing, your print will get ruined.

Use it quickly

If you’ve worked with a range of adhesives in the past, you’ve likely encountered difficult-to-use models. It is difficult to open the top, and when it does, the glue pours everywhere and causes havoc.

Container design is an important consideration when thinking about ease of use. Choose a model that has an easy-to use tube design. The cap should be easy-to-open and close. You should also be able to apply the product precisely to the parts you desire.

Easy sticking and release

I have already highlighted the importance and effectiveness of choosing PLA glue. The temperature is used to control adhesiveness.

To make the glue stick during printing, heat is applied. Once the process is completed, the heating is stopped and the bed allowed to cool off. As the glue cools it stops gripping the print.

Decide on an adhesive that doesn’t require any effort to release.

Cleaning is simple

You know what to do after you have finished printing. You will need to clean the build plate. Depending on the glue used, this process can be either very easy or very tiring.

Water-soluble glue is best. That way, you’ll not need any special solvent to remove it. All you’ll need is some water and a sponge or towel and perhaps a soft-bristle brush. You don’t have to work hard to get the glue off.

Multiple uses

Of course, the fact that you’re on this page means you’re looking for an adhesive to use when printing with PLA filaments. However, that shouldn’t mean that if you have another printing material, like PETG, PTU, or ABS, the glue cannot be used.

Good PLA glue can be used in conjunction with all types and types of 3D filaments.

Moreover, in case a book cover gets torn, or a leather bag’s seams are falling apart, the glue should be able to help.

Whenever you’re purchasing PLA glue, versatility is a factor you shouldn’t ignore. You should choose a unit that can be used for multiple purposes.

Tips for using PLA Adhesive

PLA printing requires glue. Without glue, you run the risk of printing an error. You could also endanger your print head by not using an adhesive.

It’s easy to print successful prints by applying the right glue to your build plate. Moreover, releasing the print when you’re done becomes easy.

Applying glue is easy.

Step 1

Start with a clean and dry print bed. You want to make sure there’s no remaining debris or greasy spots from the previous prints. Use a paper towel soaked with alcohol to wipe the bed clean.

Step 2

Apply the glue. You have two choices – applying the glue to the whole bed or only to the parts where you want the prints to stick to.

Apply glue and then print your items. Be sure to use the correct temperature settings.


You don’t have to apply glue for each print. You can use the remaining glue layer to make the next print after you have removed the print. Some people prefer to add a little glue to make the residual adhesive stick. Others simply rub a wet towel onto the print bed to activate the glue.

In the event that there’s a buildup of the residual glue or the surface looks uneven or pitted, it’s advisable to wash off the residual glue. Warm water and a towel or brush are sufficient.

You can make the first layer stickier by using slightly higher temperatures. You can raise the temperature of the bed and print head by 5 degrees, then switch to the correct level for the second layer. If you experience problems transitioning from one layer to the next, simply use a constant temperature setting.


Do not use soap or other special cleaning products to clean the print bed. These products can leave residues on the build plate or cause damage. Water is sufficient.

People Also Asked Questions (FAQs).

Why is 3D Printing so difficult without adhesive glue?

Materials such as PLA, PETG and other organic compounds will not stand up without a support structure. ABS The printing process can be complicated if you move the build plate. Applying adhesive is crucial because it holds the print in position, allowing for easy and accurate printing.

Why do people prefer glue sticks for print beds?

Glue sticks are much easier to use than adhesive tape. Crucially, glue sticks don’t leave a residue, which makes subsequent prints easy and simplifies the cleaning process afterwards.

The adhesiveness of the glue decreases when the temperature drops. This makes it easier to remove the print. The glue is water-soluble so you can wash it with water.

Do I have to reapply adhesive after each print?

It is not necessary that you apply a new layer to every print. Some adhesives can hold up to five prints per piece. To ensure a firm grip, you may need to apply a little glue to the plate before each print.

Note: if you notice unevenness on the surface, you’ll need to reapply the adhesive.

You must heat the print bed even if you are using PLA glue

Heating is an essential step. The heat is what makes glue work. Prints stick when heated to the right temperature (70 to 90 degrees). The glue tackiness also decreases when the heating is stopped and the temperatures drop. It becomes easy to remove the prints without any difficulty.

Final Verdict

It is possible to make products for a fraction of the cost in these modern times. 3D printing is a great way to do this. craft different plastic items From toys to bottle openers and showerheads,

But if you’re to come up with beautiful items and create items from your designs with accuracy, then you need to print effectively. Importantly, you must ensure that your prints remain on the build plate. Poor prints can be caused if the process is disrupted by movement or wobbling.

The best glue for PLA is essential. The glues reviewed here stick the prints to the build plate, making it easy for the nozzles to lay the filament. This results in beautiful prints.

Also Check:

Also Read:  Inkjet vs. Laser for Photo Printing: Which One To Choose?
We will be happy to hear your thoughts

Leave a reply

NRX Empire